How to Shorten Links for X (Twitter): What t.co Does, and When Your Own Short Link Helps

X already shortens every link with t.co and counts it as 23 characters. What that means for your posts, and the four cases where your own short link is still worth it.

MiniSnip Team9 min read
In this article
  1. What X does with every link
  2. So does shortening a link save characters on X?
  3. When your own short link is still worth it
  4. How to shorten a link for X
  5. UTM tags without the ugly address
  6. Links in your X bio
  7. Links in DMs
  8. Common questions about links on X
  9. Examples
  10. A quick checklist before you post
  11. Sources

The short answer: you don't need to shorten a link to save characters on X. X wraps every link in its own t.co shortener, and each link counts as 23 characters, however long it is. You can't switch this off. A short link of your own is still worth it for four reasons: knowing who clicked, links people see or type (in images, videos and your bio), changing the destination later, and keeping one link across every platform.

The facts about t.co below come from X's Help Center and its developer documentation, read on 20 November 2026.

When you post a link on X, three things happen:

  1. It's wrapped in t.co. X's help page says links shared on X, including links in Direct Messages, are automatically processed and shortened to a t.co link.
  2. It counts as 23 characters. X's developer documentation on counting characters says all URLs are wrapped with the t.co shortener and count as 23 characters, regardless of the original length. A 200-character product link and a 20-character short link cost the same.
  3. People still see a readable address. X's help page on posting links says the original URL, or a shortened version of it, is displayed in the post, even though the link underneath is t.co.

X gives three reasons for t.co: to leave room for your message, to measure how often a link is clicked as a signal of how interesting a post is, and to protect people from harmful sites. Every t.co link is checked against a list of potentially dangerous sites, and people are warned before they continue to a match.

Can you opt out? No. X's help page says it will shorten URLs you post, and you can't opt out.

No. Here is the arithmetic:

What you paste Characters it uses
https://shop.example.com/collections/autumn/products/oak-desk-lamp?variant=4412&utm_source=x 23
minisnip.com/lamp 23
Two links of any length 46
Three links 69

Some apps adjust the character count as you type and some don't, according to X's help page, so the counter may look wrong until you post. The count that matters is X's, and it's always 23 per link.

1. You want to know who clicked

X counts clicks on t.co links for its own ranking. What you see depends on your account and the analytics X offers you, and it can't tell you what happened to the same link when it was shared in a WhatsApp group, a newsletter or a podcast description.

A short link of your own counts every click in one place, with the country, device and app it came from, whichever platform it was shared on. X's own help page says you can keep using a shortener and that its tracking keeps working.

Two things to know when you read those numbers:

  • X fetches links too. To build a card, X's crawler opens your link, and other services that pick up your post can do the same. A basic counter adds those visits to your clicks. MiniSnip recognises preview fetchers and crawlers by name and keeps them out. Our guide to link preview bots shows what each app sends.
  • Clicks from the X app may arrive without a referrer. MiniSnip reads the in-app browser and the source tag on the link, so they don't end up as "Direct".

Some links aren't clicked, they're read:

  • Inside an image or a video, such as a screenshot, a slide, the end of a video or a thumbnail.
  • In a Space or a podcast, where you say it out loud.
  • On anything printed, such as a poster, a conference badge or merchandise.

There, x.com/yourname/status/183… or a long shop address is useless. A short link with a readable ending, such as minisnip.com/talk or go.yourbrand.com/lamp, can be remembered and typed.

3. You might need to change where it goes

Once a post has been shared, quoted and screenshotted, changing the link inside it isn't practical. A short link of your own points wherever you tell it to: fix a typo, swap a sold-out product for its replacement, or send last month's announcement to this month's page. The post keeps working, and so does every quote post and screenshot of it.

The same short link can go in your X bio, your Instagram bio, your email signature and a QR code. Click data for all of them lands in one dashboard, and if the destination changes, you change it once.

  1. Make the short link. Paste the long address into MiniSnip and press Shorten. With a free account you can choose the ending (minisnip.com/lamp), and the link stays in your dashboard with its clicks.
  2. Tag where it was shared (optional). Add ?src=x to the short link in your post, or use a separate short link for X, so X clicks are counted apart from other places.
  3. Check the card. Paste the link into our link preview checker to see the card X will show. X uses the large-image card only if the page sets twitter:card to summary_large_image.
  4. Post it. X wraps it in t.co as usual. Readers see your short address in the post; the click goes t.co → your short link → your page, in a fraction of a second.

UTM tags without the ugly address

If you report traffic in Google Analytics, tag X links with UTM parameters, for example utm_source=x&utm_medium=social&utm_campaign=autumn-launch. Without them, visits from the X app often land in Analytics as "Direct" or under a referrer you can't tie to a post.

The catch is the address. X shows a shortened version of the original URL in your post, and a tagged URL is long and full of symbols. Two ways around it:

  • Put the tags behind a short link. Make the short link point to the tagged address. The post shows minisnip.com/lamp; Analytics still receives every tag. MiniSnip's built-in UTM builder adds them for you, and you can change them later without changing the link.
  • Use a separate short link per campaign or post, so each one has its own click count in MiniSnip and its own campaign name in Analytics.

Our UTM parameters guide explains which tags to use and why visits sometimes show up as "Unassigned".

Your profile's website field is the one link everyone sees when they visit your profile. Use a short link there too:

  • One link that never needs changing. Point it at your latest launch, newsletter or shop, and change the destination instead of editing your profile.
  • A link-in-bio page if you have several things to share. MiniSnip includes a free one with 10 links, with views and taps counted without bots: see the link in bio guide.

Links in Direct Messages are wrapped in t.co too, according to X's help page. X's note on that page is worth remembering: anyone with a t.co link can follow it to the destination. Don't paste private links, such as password reset pages or private documents, into a DM thinking the short link hides them.

Do short links look spammy? Readers see the domain of the link you pasted. A random code on a generic shortener can look less trustworthy than a readable ending or your own domain, such as go.yourbrand.com/lamp. If trust matters, use a branded short link.

Does the card still show if I use a short link? Yes. X follows the redirect and builds the card from the final page's tags. If the card is wrong, fix the tags on the page, or set a custom preview on the short link (MiniSnip Pro).

Does X penalise posts with links? X hasn't published how links affect reach, and claims you'll read online are guesses. Measure it yourself: post similar content with and without links and compare.

Can I use t.co myself? No. X's help page says t.co is only used on links posted on X and isn't available as a general shortening service.

Examples

A newsletter writer posts each issue on X with minisnip.com/issue-42. The same link goes in LinkedIn and the newsletter's own archive page. In the dashboard, X clicks are tagged ?src=x, so the writer can see which channel brought readers.

A shop shows a product in a video and puts go.shop.com/lamp on screen for the last three seconds. When the lamp sells out, the link is pointed at the new model, and the video keeps selling.

A speaker puts minisnip.com/slides on the last slide and in the post announcing the talk. People in the room type it; people on X click it. Both show up in the same chart.

A quick checklist before you post

  • One link per idea: each link costs 23 characters.
  • A readable ending for anything people will see or say.
  • The right card: check og:image and twitter:card with the link preview checker.
  • A tag or a separate link for X, so you can compare channels.
  • Nothing private: anyone with the link can open it.

Sources

X Help Center: About X's link service (t.co) and How to post links in a post; X developer documentation: Counting characters. All read on 20 November 2026.

Frequently asked questions

Do I need to shorten links on Twitter (X)?

Not to save characters. X wraps every link in t.co and counts it as 23 characters whatever its length. A short link of your own helps with tracking clicks, links people see or type, and changing the destination later.

How many characters does a link use on X?

23. X's developer documentation says every URL is wrapped with the t.co shortener and counts as 23 characters, regardless of its original length.

Can I turn off t.co link shortening on X?

No. X's help page says it shortens every URL posted on X, including in Direct Messages, and that you can't opt out.

Can I still use Bitly or another shortener on X?

Yes. X's help page says you can keep using a URL shortener and that its tracking keeps working. X wraps your short link in t.co as well.

Why do my X link clicks look higher than my website visits?

X and other apps fetch links to build preview cards, and some shorteners count those fetches as clicks. MiniSnip leaves preview bots and crawlers out, so the count is people.

Is a t.co link private?

No. X's help page notes that anyone with a t.co link can follow it to the destination, so don't share private links in posts or DMs.